Fix#31707.
It's split from #31724.
Although #31724 could also fix#31707, it has change a lot so it's not a
good idea to backport it.
(cherry picked from commit 81fa471119a6733d257f63f8c2c1f4acc583d21b)
Fix#26685
If a commit status comes from Gitea Actions and the user cannot access
the repo's actions unit (the user does not have the permission or the
actions unit is disabled), a 404 page will occur after clicking the
"Details" link. We should hide the "Details" link in this case.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/68361714-b784-4bb5-baab-efde4221f466"
width="400px" />
(cherry picked from commit 7dec8de9147b20c014d68bb1020afe28a263b95a)
Conflicts:
routers/web/repo/commit.go
trivial context commit
The previous commit laid out the foundation of the quota engine, this
one builds on top of it, and implements the actual enforcement.
Enforcement happens at the route decoration level, whenever possible. In
case of the API, when over quota, a 413 error is returned, with an
appropriate JSON payload. In case of web routes, a 413 HTML page is
rendered with similar information.
This implementation is for a **soft quota**: quota usage is checked
before an operation is to be performed, and the operation is *only*
denied if the user is already over quota. This makes it possible to go
over quota, but has the significant advantage of being practically
implementable within the current Forgejo architecture.
The goal of enforcement is to deny actions that can make the user go
over quota, and allow the rest. As such, deleting things should - in
almost all cases - be possible. A prime exemption is deleting files via
the web ui: that creates a new commit, which in turn increases repo
size, thus, is denied if the user is over quota.
Limitations
-----------
Because we generally work at a route decorator level, and rarely
look *into* the operation itself, `size:repos:public` and
`size:repos:private` are not enforced at this level, the engine enforces
against `size:repos:all`. This will be improved in the future.
AGit does not play very well with this system, because AGit PRs count
toward the repo they're opened against, while in the GitHub-style fork +
pull model, it counts against the fork. This too, can be improved in the
future.
There's very little done on the UI side to guard against going over
quota. What this patch implements, is enforcement, not prevention. The
UI will still let you *try* operations that *will* result in a denial.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This is an implementation of a quota engine, and the API routes to
manage its settings. This does *not* contain any enforcement code: this
is just the bedrock, the engine itself.
The goal of the engine is to be flexible and future proof: to be nimble
enough to build on it further, without having to rewrite large parts of
it.
It might feel a little more complicated than necessary, because the goal
was to be able to support scenarios only very few Forgejo instances
need, scenarios the vast majority of mostly smaller instances simply do
not care about. The goal is to support both big and small, and for that,
we need a solid, flexible foundation.
There are thee big parts to the engine: counting quota use, setting
limits, and evaluating whether the usage is within the limits. Sounds
simple on paper, less so in practice!
Quota counting
==============
Quota is counted based on repo ownership, whenever possible, because
repo owners are in ultimate control over the resources they use: they
can delete repos, attachments, everything, even if they don't *own*
those themselves. They can clean up, and will always have the permission
and access required to do so. Would we count quota based on the owning
user, that could lead to situations where a user is unable to free up
space, because they uploaded a big attachment to a repo that has been
taken private since. It's both more fair, and much safer to count quota
against repo owners.
This means that if user A uploads an attachment to an issue opened
against organization O, that will count towards the quota of
organization O, rather than user A.
One's quota usage stats can be queried using the `/user/quota` API
endpoint. To figure out what's eating into it, the
`/user/repos?order_by=size`, `/user/quota/attachments`,
`/user/quota/artifacts`, and `/user/quota/packages` endpoints should be
consulted. There's also `/user/quota/check?subject=<...>` to check
whether the signed-in user is within a particular quota limit.
Quotas are counted based on sizes stored in the database.
Setting quota limits
====================
There are different "subjects" one can limit usage for. At this time,
only size-based limits are implemented, which are:
- `size:all`: As the name would imply, the total size of everything
Forgejo tracks.
- `size:repos:all`: The total size of all repositories (not including
LFS).
- `size:repos:public`: The total size of all public repositories (not
including LFS).
- `size:repos:private`: The total size of all private repositories (not
including LFS).
- `sizeall`: The total size of all git data (including all
repositories, and LFS).
- `sizelfs`: The size of all git LFS data (either in private or
public repos).
- `size:assets:all`: The size of all assets tracked by Forgejo.
- `size:assets:attachments:all`: The size of all kinds of attachments
tracked by Forgejo.
- `size:assets:attachments:issues`: Size of all attachments attached to
issues, including issue comments.
- `size:assets:attachments:releases`: Size of all attachments attached
to releases. This does *not* include automatically generated archives.
- `size:assets:artifacts`: Size of all Action artifacts.
- `size:assets:packages:all`: Size of all Packages.
- `size:wiki`: Wiki size
Wiki size is currently not tracked, and the engine will always deem it
within quota.
These subjects are built into Rules, which set a limit on *all* subjects
within a rule. Thus, we can create a rule that says: "1Gb limit on all
release assets, all packages, and git LFS, combined". For a rule to
stand, the total sum of all subjects must be below the rule's limit.
Rules are in turn collected into groups. A group is just a name, and a
list of rules. For a group to stand, all of its rules must stand. Thus,
if we have a group with two rules, one that sets a combined 1Gb limit on
release assets, all packages, and git LFS, and another rule that sets a
256Mb limit on packages, if the user has 512Mb of packages, the group
will not stand, because the second rule deems it over quota. Similarly,
if the user has only 128Mb of packages, but 900Mb of release assets, the
group will not stand, because the combined size of packages and release
assets is over the 1Gb limit of the first rule.
Groups themselves are collected into Group Lists. A group list stands
when *any* of the groups within stand. This allows an administrator to
set conservative defaults, but then place select users into additional
groups that increase some aspect of their limits.
To top it off, it is possible to set the default quota groups a user
belongs to in `app.ini`. If there's no explicit assignment, the engine
will use the default groups. This makes it possible to avoid having to
assign each and every user a list of quota groups, and only those need
to be explicitly assigned who need a different set of groups than the
defaults.
If a user has any quota groups assigned to them, the default list will
not be considered for them.
The management APIs
===================
This commit contains the engine itself, its unit tests, and the quota
management APIs. It does not contain any enforcement.
The APIs are documented in-code, and in the swagger docs, and the
integration tests can serve as an example on how to use them.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Add an optional `order_by` parameter to the `user.ListMyRepos`
handler (which handles the `/api/v1/user/repos` route), allowing a user
to sort repos by name (the default), id, or size.
The latter will be useful later for figuring out which repos use most
space, which repos eat most into a user's quota.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- add package counter to repo/user/org overview pages
- add go unit tests for repo/user has/count packages
- add many more unit tests for packages model
- fix error for non-existing packages in DeletePackageByID and SetRepositoryLink
Document return type for the endpoints that fetch specific files from a
repository. This allows the swagger generated code to read the returned
data.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit bae87dfb0958e6a2920c905e51c2a026b7b71ca6)
- In the spirit of #4635
- Notify the owner when their account is getting enrolled into TOTP. The
message is changed according if they have security keys or not.
- Integration test added.
The PATCH if issue & pull request switched to use the service
functions instead. However, the service function changing the state is
not idempotent. Instead of doing nothing which changing from open to
open or close to close, it will fail with an error like:
Issue [2472] 0 was already closed
Regression of: 6a4bc0289d
Fixes: https://codeberg.org/forgejo/forgejo/issues/4686
- Currently if the password, primary mail, TOTP or security keys are
changed, no notification is made of that and makes compromising an
account a bit easier as it's essentially undetectable until the original
person tries to log in. Although other changes should be made as
well (re-authing before allowing a password change), this should go a
long way of improving the account security in Forgejo.
- Adds a mail notification for password and primary mail changes. For
the primary mail change, a mail notification is sent to the old primary
mail.
- Add a mail notification when TOTP or a security keys is removed, if no
other 2FA method is configured the mail will also contain that 2FA is
no longer needed to log into their account.
- `MakeEmailAddressPrimary` is refactored to the user service package,
as it now involves calling the mailer service.
- Unit tests added.
- Integration tests added.
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
(cherry picked from commit 416c36f3034e228a27258b5a8a15eec4e5e426ba)
Conflicts:
- tests/integration/auth_ldap_test.go
Trivial conflict resolved by manually applying the change.
- routers/web/auth/oauth.go
Technically not a conflict, but the original PR removed the
modules/util import, which in our version, is still in use. Added it
back.
- Fixes a panic where the file history router would panic if the page
number was set to a page where no commits would be returned. It now
returns a 404 in such case.
- Regresion of a5b1c1b0b3
- Panic log provided by @algernon.
- Minimal integration test added.
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
To reproduce:
- make the repo creation form return with an error, like a duplicate name
- click on the Object format dropdown
- the options are missing as the listbox is empty
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4360
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Solomon Victorino <git@solomonvictorino.com>
Co-committed-by: Solomon Victorino <git@solomonvictorino.com>
The `/repos/{owner}/{repo}/issues/comments/{id}` API endpoint returns an
`assets` field, but the route handler did not load attachments, thus,
the field was never populated.
This patch fixes that, and adds a test to exercise it. The test fails
without the fix.
This addresses a bug discovered in Codeberg/Community#1607.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- We were previously using `github.com/keybase/go-crypto`, because the
package for openpgp by Go itself is deprecated and no longer
maintained. This library provided a maintained version of the openpgp
package. However, it hasn't seen any activity for the last five years,
and I would therefore consider this also unmaintained.
- This patch switches the package to `github.com/ProtonMail/go-crypto`
which provides a maintained version of the openpgp package and was
already being used in the tests.
- Adds unit tests, I've carefully checked the callstacks to ensure the
OpenPGP-related code was covered under either a unit test or integration
tests to avoid regression, as this can easily turn into security
vulnerabilities if a regression happens here.
- Small behavior update, revocations are now checked correctly instead
of checking if they merely exist and the expiry time of a subkey is used
if one is provided (this is just cosmetic and doesn't impact security).
- One more dependency eliminated :D
I noticed that Forgejo does not allow HTTP range requests when downloading artifacts. All other file downloads like releases and packages support them.
So I looked at the code and found that the artifact download endpoint uses a simple io.Copy to serve the file contents instead of using the established `ServeContentByReadSeeker` function which does take range requests into account.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4218
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: ThetaDev <thetadev@magenta.de>
Co-committed-by: ThetaDev <thetadev@magenta.de>
If a repository has
git config --add push.pushOption submit=".sourcehut/*.yml"
it failed when pushed because of the unknown submit push
option. It will be ignored instead.
Filtering out the push options is done in an earlier stage, when the
hook command runs, before it submits the options map to the private
endpoint.
* move all the push options logic to modules/git/pushoptions
* add 100% test coverage for modules/git/pushoptions
Test coverage for the code paths from which code was moved to the
modules/git/pushoptions package:
* cmd/hook.go:runHookPreReceive
* routers/private/hook_pre_receive.go:validatePushOptions
tests/integration/git_push_test.go:TestOptionsGitPush runs through
both. The test verifying the option is rejected was removed and, if
added again, will fail because the option is now ignored instead of
being rejected.
* cmd/hook.go:runHookProcReceive
* services/agit/agit.go:ProcReceive
tests/integration/git_test.go: doCreateAgitFlowPull runs through
both. It uses variations of AGit related push options.
* cmd/hook.go:runHookPostReceive
* routers/private/hook_post_receive.go:HookPostReceive
tests/integration/git_test.go:doPushCreate called by TestGit/HTTP/sha1/PushCreate
runs through both.
Note that although it provides coverage for this code path it does not use push options.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3651
Closes#2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Ports fuzzy search for `/issues` and `/pulls` from gitea.
Adds fuzzy search for `/user/repo/issues` and `/user/repo/pulls`.
---
## Notes
### Port: [`gitea#be5be0ac81`](be5be0ac81)
- CONFLICT (content): Merge conflict in routers/web/user/home.go
Conflict resolved by
1. keeping both `PageIsOrgIssues` and the newly introduced `IsFuzzy`
2. using `pager.AddParam(ctx, "fuzzy", "IsFuzzy")` rather than `pager.AddParamString("fuzzy", fmt.Sprintf("%v", isFuzzy))`
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping the changes from #4096, and picking the `&fuzzy=${{.IsFuzzy}}` inclusion to all urls and `{{if .PageIsPulls}}...`
### Port: [`gitea#fede3cbada`](fede3cbada)
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping previous changes and picking the replacement of `{{if .PageIsPulls}}...` with `{{template "shared/search/combo_fuzzy"...` which contains the replacement of `explorer.go` to `explorer.go_to`
### Fixup commit
replaces `Iif` with `if` which was introduced in gitea#fede3cbada
### Feature commit
adds in support for /user/repo/(issues|pulls) + test
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Kerwin Bryant <kerwin612@qq.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4160
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
This adds org-mode readmes to the extensions that are prioritized when
searching for readme. Org-mode readmes come after markdown readmes in
terms of priority and before txt readmes.
Closes#4073
Add tag protection manage via rest API.
---------
Co-authored-by: Alexander Kogay <kogay.a@citilink.ru>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d4e4226c3cbfa62a6adf15f4466747468eb208c7)
Conflicts:
modules/structs/repo_tag.go
trivial context conflict
templates/swagger/v1_json.tmpl
fixed with make generate-swagger
have repo OrderBy definitions defined in one place and use a single type
for OrderBy database options
(cherry picked from commit bb04311b0b5b7a28f94c4bc409db1c4a04bcef17)
When using the MinIO storage driver for Actions Artifacts, we found that
the chunked artifact required significantly more memory usage to both
upload and merge than the local storage driver. This seems to be related
to hardcoding a value of `-1` for the size to the MinIO client [which
has a warning about memory usage in the respective
docs](https://pkg.go.dev/github.com/minio/minio-go/v7#Client.PutObject).
Specifying the size in both the upload and merge case reduces memory
usage of the MinIO client.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
(cherry picked from commit 45dbeb5600d1f552c0134721fe49e8fd1099b5a4)
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit fc2d75f86d77b022ece848acf2581c14ef21d43b)
Conflicts:
modules/setting/config_env.go
modules/storage/azureblob.go
services/webhook/dingtalk.go
services/webhook/discord.go
services/webhook/feishu.go
services/webhook/matrix.go
services/webhook/msteams.go
services/webhook/packagist.go
services/webhook/slack.go
services/webhook/telegram.go
services/webhook/wechatwork.go
run make lint-go and fix Forgejo specific warnings
More details are in PR message.
Changes applied:
* replace `Err_Services` with more specific `Err_DisabledRegistration`
* highlight the self-registration option instead of services section
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4063
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
